Blackt Electrotech BT31C motion sensor
Blackt Electrotech BT31C is new energy saving device, which turn on light or fan automatically with all integrated kit.
when it’s kept on it will use its infrared rays and sense human motion. Once it senses human motion it automatically turns on the device connected to it.
QUALITY CONTROL STANDARD:
- Operating volt: ac 220-250v 50hz-60hz.
- Load power: upto 300/1200w max
- Ambient light: 3-2000 (adjuestable)
- Load type: incandescent lamp, led light, clf, fans,
- Detecting distance: 0~7m
- Detecting angle: 360 degree.
- Installtion hight: 2.2-4 mtr
- Motion detetion speed: 0.6~1m/s
- Power cusumption:0.1w (static) & 0.4(work)
- Working humidity: less than 93%rh
- Delay: 10 seconds -7 minutes (adjustable)
PRODUCT INSTALLATION
- Sensor unit should be instal 1.6m higher from the ground .
- The light, such as candles lamp which gives high heat should be kept from the switch aways
- When we turn On the switch main power it will take 1-2 minutes. It’s normal for the switch to turn on/off on its own.
- When you install the switch on daytime mode, the default state of the switch will make the light off. install detector & then the light will turn on. When we keep it on darker mode, the switch will be more sensitive. If the sensitivity is not that hight then turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity
How to install Video
To buy the Blackt Electrotech BT31C motion sensor click on the link
